Header34.gifMcusta,Seki-Cut,Hattori,Takeshi Saji,Koji Hara,G.Sakai
 
  
 Products
Home
Bob Lum Design
MCUSTA
SEKI CUT
HATTORI
KIKU
Mr. Itou
Takeshi Saji
Koji Hara
Seizo Imai
JKD Gift Wrap
 
 
 

 What's New! Order Info FAQs Contact Us About Seki Knife Shows

samuraionly.gif    SPECIALS (2)    samuraionly.gif 

 

 This is the page for something Special, Rare, One-of-a-kind, Limited Edition and Discontinued items for Collectors

8/3/16 UP! Due to increasing products, we have separated into two pages. This is the Page 2, and Page 1 at Special (1)

  Seizo Imai Model 911 Rescue Tool
 
 
Model 911 Rescue Tool
 
This is an unique and practical Rescue Tool designed by Phill Hoffman and produced by Seizo Imai about 25 years ago. It has a hook type blade sharpened inside with rounded blant blade tip. In emergency, it can cut the seat belt, clothes, boot, hanging rope etc without damaging human skin, Folding Lockback knife with 2-1/2" AUS-8 mirror-polished Stainless steel blade, 4-1/4" Black Kraton rubber handle with metal inlay, Comes with Black Nylon pouch with belt loops for both horizontal and vertical carry

AUS-8 blade in 3.0mm thick, 60mm blade, 170mm overall, Weight 180g

JKD Special $70.00  3 pcs. Available Now


Toun Ihara (騰雲) Custom Higonokami Lockback Folders

The first Lockback Higonokami Folders, a fusion of Japanese traditional Higonokami and modern Western stylish design & lockback device. Custom hand made by Mr. Toun Ihara in Saitama with detailed precision mechanism with smooth opening by thumb lever and firm locking in open postion. When closing, the blade stops in 90 digree for safety and snap close into the handle. A perfect fitting and action! The blade is made of the CrMo7, an improved high performance steel over ATS-34, and is hollow ground with elegant satin brushed finish, Available in different blades and handles for your choice.

HK01-D Lockback Higonokami Folder, Drop point blade 3-1/4" Drop point CrMo7 hollow ground blade with thumb notched opening lever in satin brushed finish, 4-1/4" rounded Black G10 handle with locking spring bar on back and lanyard hole on end, Comes with fancy gift box.

CrMo7 blade in 2.4mm thick, 82mm blade, 192mm overall, Weight 70g

JKD Special $280.00  Only 2 pcs. Available Now



HK01-T Lockback Higonokami Folder, Upswept blade 3-1/4" Upswept CrMo7 hollow ground blade with thumb notched opening lever in satin brushed finish, 4-1/4" rounded Red/Black G10 handle with locking spring bar on back and lanyard hole on end, Comes with fancy Gift box.

CrMo7 blade in 2.4mm thick, 82mm blade, 192mm overall, Weight 70g

JKD Special $280.00  Only 2 pcs. Available Now

 
 

HK02-SPR Lockback Higonokami Folder, Spear point blade
 
3-1/4" Spear point CrMo7 hollow ground blade with thumb notched opening lever in satin brushed finish, 4-1/4" rounded Ebonite handle with Brass liners, locking spring bar and lanyard hole on end, Comes with fancy gift box.

CrMo7 blade in 2.4mm thick, 82mm blade, 190mm overall, Weight 80g

JKD Special $350.00  Only 2 pcs. Available Now



HK02-RZ Lockback Higonokami Folder, Razor blade This is the Japanese traditional Higonokami blade shape, 3-1/4" Razor shape CrMo7 hollow ground blade with thumb notched opening lever in satin brushed finish, 4-1/4" rounded Ebonite handle with Brass liners, locking spring bar and lanyard hole on end, Comes with fancy gift box.

CrMo7 blade in 2.4mm thick, 82mm blade, 190mm overall, Weight 80g


JKD Special $350.00  SOLD OUT

 
 
HK03-SF Lockback Higonokami Folder, Sheepfoot blade
 
3-1/4" Sheepfoot CrMo7 hollow ground blade with thumb notched opening lever in satin brushed finish, 4-1/4" Satin Brushed Titanium handle with locking spring bar and lanyard hole on end, Comes with fancy gift box.

CrMo7 blade in 2.4mm thick, 82mm blade, 190mm overall, Weight 50g

JKD Special $330.00  Only 2 pcs. Available Now


HK03-CP Lockback Higonokami Folder, Clip Point blade 3-1/4" Clip point CrMo7 hollow ground blade with thumb notched opening lever in satin brushed finish, 4-1/4" Satin Brushed Titanium handle with locking spring bar and lanyard hole on end, Comes with fancy gift box.

CrMo7 blade in 2.4mm thick, 82mm blade, 190mm overall, Weight 50g

JKD Special $330.00  Only 2 pcs. Available Now


NEW!
HK14 Lockback Higonokami Folder, Carbon Fiber handle 
3-1/2" Drop point CrMo7 hollow ground blade with thumb notched opening lever in satin brushed finish, 4-1/2" Satin Brushed Carbon Fiber handle with locking spring bar and lanyard hole on end, Comes with fancy gift box.

CrMo7 blade in 3.0mm thick, 90mm blade, 203mm overall, Weight 70g

JKD Special $290.00  SOLD OUT

 
Ho-Ei (豊栄) Prunning Shears 
 
We have introduced "MURAHISA" brand professional Prunning Shears in 2013, but we always had a delivery problem. Now, we found an equivalent quality Prunning shears from Ho-Ei at reasonable price. Japanese High Carbon steel tough Hamaguri-ba blade


HA-180 60mm blade, 180mm overall, Weight 200g

JKD Special $80.00  Available Now



HA-200 70mm blade, 200mm overall, Weight 270g

JKD Special $85.00  Available Now



HA-225 75mm blade, 225mm overall, Weight 350g

JKD Special $108.00  Available Now


 
 
Rare Damascus blade Prunning Shear, 2-1/4" Hitachi Yasugi Hagane Carbon steel core forge layered Damascus Hamaguri-ba (Convex edge) blade, 5" Black forged handle with spring and stopper.


HD-200 60mm blade , 200mm overall, Weight 250g

JKD Special $110.00  Available Now



 Japanese Traditional Razor by Forgesmith, Kanenaga (兼長)
 
KN-10 Japanese Traditional Razor
  We have been receiving many requests to offer some Japanese Traditional Razors. Here is a hand forged Razor made by Miki Forgesmith, Kanenaga out of Japanese Carbon steel. Very sharp 2" blade is hollow ground with concaved back, 4" narrow tang wisteria vine wrapped handle, Comes with Wooden Kiri box

JJapanese Carbon Steel blade in 5.0mm thick, 50mm blade, 155mm overall, Weight 40g

JKD Special $125.00  Available Now

 
 "Silky" Dressmaking Shears
Precision made Professional Quality

  
DBC-250 250mm
  "Smooth Action as SilK" The "Silky" brand Shears are produced by Mcusta knives maker, Marusho with same precision machineries. The blade is made of AUS-8 Molybdenum & Vanadium Stainless steel with cold forging technology, The unique pivot constrcution ensures smooth action and cutting ability. Amber Acrylic handle fits your hand perfectly. 10" overall with 4" cutting blades. Comes with blade protective vinyl sleeve


AUS-8 blade in 4.0mm thick, 96mm blade, 250mm overall, Weight 170g

JKD Special $79.00  Available Now



DBC-270 270mm   "Smooth Action as SilK" The "Silky" brand Shears are produced by Mcusta knives maker, Marusho with same precision machineries. The blade is made of AUS-8 Molybdenum & Vanadium Stainless steel with cold forging technology, The unique pivot constrcution ensures smooth action and cutting ability. Amber Acrylic handle fits your hand perfectly. 10-1/2" overall with 4-1/2" cutting blades. Comes with blade protective vinyl sleeve

AUS-8 blade in 4.0mm thick, 110mm blade, 270mm overall, Weight 180g

JKD Special $84.00  Available Now

  "Silky" Tailor Shears
 
DSR-270 270mm
  Rugged All Purpose Shears for home and industrial use. The angled flat bottom can cut heavy material like floor carpet, vinyl sheet etc effortlessly and in straight line. The blade is made of AUS-6 Vanadium Stainless steel, The unique pivot constrcution ensures smooth action and cutting ability. Amber Glass filled 6 Nylon handle fits your hand perfectly. 10-1/2" overall with 4" cutting blades. Comes with blade protective vinyl sleeve


AUS-6 blade in 4.0mm thick, 100mm blade, 270mm overall, Weight 230g

JKD Special $69.00  Sold Out

 
 ATHRO Sommelier Knife
 
HW-10 Sommelier Knives
  This is a professional Bartender's and Waiter's Tool, and also a must for wine lover at home. Sturdy & Hardened Stainless steel Corkscrew, Leverage Arm and Bottle foil Cutter/Cap Lifter are compactly folded into solid Nickell silver Handle with Exotic wooden inlays of Maple Burl, Cocobolo, Ebonywood or Japanese Tagayasan wood with Brass liners. 4-5/8" (120mm) S-shape hand polished and rounded handle, and weight 100g. Each in a gift box.

Your choice of 4 different wood inlays (refer to the right above photo)

HW-10A Cocobolo Wood (Left Top) JKD Special $94.00  Available Now



HW-10B African Ebonywood (Left Bottom) JKD Special $94.00  Available Now

HW-10C Tagayasan wood (Right Top) JKD Special $94.00  Available Now


HW-10D Maple Burl wood (Right Bottom) JKD Special $119.00  Available Now

   ATHRO Sommelier Knife with Damascus blade
 
HW-20 Damascus Sommelier Knives
  Now available with VG-10 core forge layered Nickel/Stainless Damascus steel blade.

VG-10 Damascus blade in 2.3mm thick, 50mm blade, 120mm handle, weight 100g


Your choice of 2 different wood inlays

HW-20A Maple Burl Wood (Top) JKD Special $165.00  Available Now



HW-20B African Ebonywood JKD Special $145.00  Available Now
 
Higonokami Collections (肥後守)
Japanese Traditional Simple Slip-Joint Folders
 
  Higonokami is the Japanese traditional knife originated in 1890 and used by everyone since small school ages for sharpening pens to hobby crafts. Here are the collections from the original traditionals to modern ones
 Mr. Kei Goto Custom Made Higonokami
 Hand Carved wooden handles with Bear, Eagle and Salmon, and Wooden Holders
 
 
 
 
 


GH-40EI New Higonokami, Eagle Head Carved Ironwood,
The hand carved Eagle head on the handle end!
2-1/8" VG-10 core forge layered Stainless Damascus steel blade with selected Dessert Ironwood handle, polished and coated to avoid cracking, discoloring and watering. Unique Nickel Silver Pins inlays for the plum flower on both sides of handle. 3-1/2" closed. Comes with custom crafted Zebra wood holder with leather belt and Carabineer belt hook.

VG-10 Damascus blade in 2.5mm thick, 54mm blade, 114mm overall, Weight 30g

JKD Special $320.00  SOLD OUT



GH-40EQ New Higonokami, Eagle Head Carved Quincewood Same as above, but with Quince Burl wood Handle and Quince Burl wood Holder

JKD Special $320.00 
Sold Out



GH-40SI New Higonokami, Salmone Head Carved Ironwood The hand curved Salmon head on the handle end! Ironwood handle and Zebra wood holder

JKD Special $320.00 
Available Now



GH-40SQ New Higonokami, Salmon Head Carved Quincewood Same as above, but with Quince Burl wood Handle and Quince Burl wood Holder

JKD Special $320.00  Available Now



GH-40BI New Higonokami, Bear Head Carved Ironwood The hand curved Bear head on the handle end! Ironwood handle and Zebra wood holder

JKD Special $320.00 
SOLD OUT



GH-40BQ New Higonokami, Bear Head Carved Quincewood Same as above, but with Quince Burl wood Handle and Quince Burl wood Holder

JKD Special $320.00  SOLD OUT

 Mr. Nagao Hand Forged Higonokami
 mn-10.jpg
 mn-10a.jpg
 

 

 MN-10  Original Nagao Higonokami  Hand-forged by Traditional Blacksmith, Motosuke Nagao.  This is an original Higonokami, still made in same old traditional way as 100 years ago. Miki's 78 years old Blacksmith, Mr. Motosuke Nagao is the 4th generation, and the only one existing maker of this original Higonokami now. This is his high-end model of 4" Aogami (Hitachi Blue carbon steel) core edge forge layered Damascus steel blade, 5-1/8" Brass handle engraved with his signature and trade mark and his famous Tiger/Bamboo design. Comes with wooden Kiri box with his signature in caligraph and red Rakuin.

Aogami Damascus blade in 4.5mm thick, 100mm blade, 220mm overal in openl, Weight 100g 

JKD Special $164.00  Available Now 

 

 
 
This is for size comparion of MN-10 Large and MN-20 Small
 


NEW! MN-20  Original Nagao Higonokami, Small This is a new smaller version of MN-10 with 3-1/8" Aogami (Hitachi Blue carbon steel) core edge forge layered Damascus steel blade, 3-3/4" Brass handle engraved with his signature and trade mark and his famous Tiger/Bamboo design. Comes with wooden Kiri box with his signature in caligraph and red Rakuin

Aogami Damascus blade in 4.5mm thick, 80mm blade, 180mm overall in open, Weight 70g 

JKD Special $134.00  Available Now  

 

  Back! HIRO 9-pc. Wood Carving Knife Set

 
 

 

 HR-701  At the Seki Hamono-Kobo (Knife Workshop), we have showcases to display some representative products from various knife makers in Seki. We had many visitors to buy knives at the Custlery Festival. One of the items they showed interest and wanted to buy from the showcases was the Hiro 9-pc. Wood Carving Knife.

It comes with 9 different tools of 2 different size Kiridashi knife, 1 pen blade knife, 4 Shokoku-To (carvers) of 2 round, 1 triangle and 1 flat, 1 Saw blade and 1 File. These blades are made of High Carbon steel V-Toku#2 and Dark Color Natural Wooden handles.  Each tool is neatly stored in the pocket of Canvas Cloth Roll Bag and Gift Boxed with Instruction sheet.

JKD Special $138.00  Available Now

    
 

 Old BlackJack Knives in Mint Condition for Collectors 

  
 

 No   Gimmicks... Just Performancebj.jpg

 

 During the years of 1987 to 1990, Blackjack knives have been designed by Mike Stewart and produced in Seki, Japan. I was deeply involved with all Japanese production before they went to bankruptcy. I have recently found some old Blackjack knives at the factories, and would like to offer them for Blackjack collectors.  Since original Japanese production was very small quantity per model, it is hard to find in the market and is now becoming a rare collector model.  You can get Blackjack information at some forums, www.KnifeForums.com , www.BlackjackKnives.us etc.

 

 Blackjack  FM-II  Folding Mamba

  bj-80.jpg
  bj-80b.jpgbj-80d.jpg
  bj-80a.jpg
 

BJ-80  FM-II Folding Mamba II   This is a custom hand made replica of the Folding Mamba, the first Folder from Blackjack introduced in late 1967 as the strongest and hadiest tactical folders in the market. Mr. Seizo Imai was involved with this production at his factory in Seki, stating with Kraton handle to Micarta, Cocobolo and Stag handle versions, and they were the best sellers in Blackjack line. Over 40 years now, Mr. Imai is now an individual custom knifemaker and is making various famous models replicas such as Loveless, Horn, Centofante in fine details and precision work. You can see his craftsmanship at Imai page.  I have recently asked him to make some custom made replicas of Blackjack Folding Mambas, and he has hand made 3 pcs. each of four different handles in exactly same size and shape, but with upgraded ATS-34 blade instead of AUS-8 originally used. This will be a good addition to your Blackjack collection!

Folding lock back knife, 3-1/4" fine brushed (hair-line) ATS-34 stainless steel recurved blade with large false edge on back and thumb opening stud, 4-1/4" handle with fine brushed (hair-line) solid Nickel silver bolster and liners. 7-1/2" open. Weight 130g. Your choice of handle materials available in Stag, Quincewood, Jiggedbone and Camelbone.

FM-II-Q   Quincewood handle   JKD Special $345.00  SOLD OUT  

 FM-II-C   Camel Bone handle   JKD Special $345.00  SOLD OUT  
  FM-II-J   Jigged Bone handle   JKD Special $345.00  SOLD OUT 

 

Products | HomeBob Lum Design | Mcusta | Seki Cut | Hattori | Kiku 

Mr.Itou  | Saji |  | Koji Hara | Seizo Imai | JKD Gift Wrap

Img1595.jpg